Glycol type and readings are recorded on the Glycol page.
Target ranges pre-populated from system type. Override if your supplier specifies different values.
Fixed thresholds: Under 50 within target · 50–150 monitor · over 150 action required
Not applicable — no glycol recorded for this system.
Reagents: Molybdate HR No.1 & No.2
Reagents: Nitriphot 1 & 2
Reagents: Iron MR 1 & 2 · under 1 mg/L within target · 1–5 mg/L monitor · over 5 mg/L action required
Instrument reading × dilution factor. The instrument reading is kept as entered.
Reagents: Coppercol 1 & 2 · under 0.1 mg/L within target · 0.1–0.5 mg/L monitor · over 0.5 mg/L action required
Reagent: Alkaphot
Milligrams of product per litre of system water. Required = system volume × dose rate.
Your own judgement. It is shown on the report alongside the calculated result.